My Ansco Memo camera
The Ansco Memo camera is this week's camera that I'm spotlighting, and it's a camera I've been itching to use for a while now. It's also the second time I've owned this particular camera. The first time was almost 35 years ago when I came across it at a camera show and was struck by its vertical design with the small round viewfinder on top. At first, I thought it may have been a small, odd box camera, but upon further inspection, it was a fairly early 35mm camera.
My camera collection is constantly evolving, and I had sold the Memo camera I owned. However, my fascination with the Ansco Memo camera persisted, leading me to seek out another one a few years back. This time, I was on the lookout for the Boy Scout version of the Memo camera, a rare find that commands a price twice that of the standard version.
I found the current Memo camera online at an excellent price. The purchase was during the lost COVID years. The camera came with a significantly worn leather case, but it didn't have the needed film cassettes to use the camera. The Ansco camera was introduced between 1926-27, and the regular 35mm cassettes we're accustomed to now weren't standardized until 1934. Any camera manufacturer that made 35mm cameras during this time period had their own 35mm cassettes to use in their cameras. There is another Memo camera that's made by Agfa, which has similar cassettes and is somewhat interchangeable with the Ansco version. Still, I'll talk more about that later in the post.
My Memo camera appeared to be in good working condition, with a functional shutter, so I was eager to use it for this post. I reached out to my friends in the camera-collecting community, and one of them, who had acquired a substantial collection in the past, came to my rescue. He not only had the empty cassettes I needed but also a roll of Agfa pre-loaded film in a cassette that would fit my Ansco camera. His generosity was overwhelming, and I was now fully equipped to use my camera.
My Ansco Memo camera with very worn case.
The Company:
The Ansco Camera Company has a fascinating history and is a key player in the evolution of photography. Its roots can be traced back to 1842 when Edward Anthony, a prominent photographic supplier in New York, established E. Anthony & Co. Initially, the company focused on importing and selling daguerreotype supplies, but as the industry progressed, it began producing its own photographic equipment.
In 1854, Edward's brother, Henry T. Anthony, joined the business, leading to its rebranding as E. & H.T. Anthony & Co. The company thrived during the American Civil War by supplying cameras, chemicals, and photographic plates, which were critical for documenting the conflict. By the late 19th century, Anthony & Co. was one of the largest photographic supply houses in the United States.
The pivotal moment in the company's history came in 1902 when it merged with the Scovill & Adams Company, a long-time competitor. This merger resulted in the formation of the Anthony & Scovill Company, which adopted the name "Ansco" for branding purposes. Ansco emerged as a significant player in the early 20th century, producing cameras, film, and related accessories.
Ansco Memo Ad.
Ansco's fortunes were closely tied to innovation and competition. It introduced popular products like the Ansco Memo in 1927, one of the earliest subminiature cameras, and the Anscoflex in the 1950s, a unique twin-lens reflex camera designed by the famous industrial designer Raymond Loewy. Its cameras were known for reliability and affordability, appealing to amateur photographers.
During World War II, Ansco faced a significant challenge due to its ties to the German company Agfa. Ansco was owned by the German chemical conglomerate IG Farben, leading to its seizure by the U.S. government under the Trading with the Enemy Act. Post-war, the company was Americanized, and its assets were sold to General Aniline & Film (GAF) Corporation in 1943.
Under GAF, Ansco continued to produce innovative products, including cameras and color film. However, by the 1960s, it struggled to compete with industry giants like Eastman Kodak and Polaroid. GAF eventually shifted its focus to industrial applications of photographic film, and Ansco's consumer products gradually disappeared from the market.
Despite its decline, Ansco's legacy endures in the history of photography as a company that made significant contributions to camera technology and film production. Its influence is still appreciated by collectors and photography enthusiasts who treasure its vintage cameras and historical impact on the field.
My Camera:
My Ansco Camera is 5" tall, including the round viewfinder, by 2 3/8" wide, including the shutter release, by 2 5/8" deep, and weighs 13.8 oz with two empty film cassettes in the camera. The original Ansco Memo camera wasn't leather-covered like mine is or has the shutter release guard. It was a stained wood camera with just a knob ion a lever sticking out of the camera to release the shutter. It wasn't until later in the camera's production that Ansco covered the camera in black leather and then added the shutter release guard to help prevent unnecessary shutter tripping. A wire handle on top of the camera makes it easy to carry the camera when you're not shooting.
The camera has a Wollensak Velostigmat F6.3 lens with an unknown focal length and fixed focus. The camera only has three different shutter speeds, 1/25, 1/50, and 1/100, along with "B." The lens does offer aperture control that goes from f6.3-f16. Both the shutter speed setting on top of the lens and the aperture settings on the bottom of the lens are set by a small slider arm. The shutter release is on the right side of the camera and is protected by a small curved piece of metal intended to help with unexpected double exposures when you're not using the camera. It was more of a nuance than a help. The viewfinder on the top of the camera is easy to look through but doesn't give you an actual rectangular image. It has a more square look, so you must keep that in mind when framing your images.
During this era, 35mm film was mainly used in motion picture cameras. The Ansco Memo uses 35mm, which travels vertically in the camera instead of horizontally, which is more commonplace nowadays. To transport the film across the shutter, the camera utilizes a "claw" method of grabbing the film sprockets on the edge of the 35mm frame and pulling it down across the shutter. The back of the camera, which is removable to lead the film, has a claw mechanism. The film doesn't need to be moved very far as the Ansco Memo isn't a full frame 35mm camera (24mmx36mm). It has a half-frame size of 18mm x 24mm and is in the horizontal format when holding the camera. The film only needs to move about 19-20mm to get to the following exposure.
I was gifted two different cassettes for this camera. I received an original Ansco cassette with a curved side and a fully loaded Agfa cassette, which is the squared-off version. Due to how the camera is made, you can put the Agfa version on top of the Ansco camera. The top is for unexposed film, and the take-up of the cassette with the curved side needs to go on the bottom of the camera. If you look at the camera's take-up area, there are some wooden braces that don't allow the squared-off cassettes into it, but the curved cassettes fit as they should. At this point, I put the unexposed Agfa cassette into the top of the camera and put the film leader into the take-up cassette, and we're ready to go.
To open the film cassettes, one of the sides comes off the cassette. The easiest way to open it is to slightly pince the corner of the cassette; this will release some pressure, and the cap will come right off. Inside the cassette is a coiled wire, which is used to guide the film into the cassette and not have it bunch up. When loading film into the cassette or unloading it into my processing reel, the film would move very smoothly, and there was no problem getting the film in or out, which was a worry when I first started.
To open the camera to load the film, on top of the camera is a slider that you push over, and the back of the camera comes off. Due to the smaller frame size, the Ansco camera takes 50 images on a pre-loaded roll of film. The frame counter on the camera advances up to 50. To advance the film to the next frame, you slide the advance bar on the back of the camera down once, advancing the film to the next frame. Similar to the current 35mm camera, the camera is in the horizontal format, and to take a vertical image, you need to turn the camera. This is awkward, but it wasn't bad when I ran some film through the camera.
My Results:
I put the roll of Agfa Rapid film into the camera and shot about 50 images of walking my dog around the neighborhood. I didn't have a good sense of processing time since the film was close to 90 years out of date. I did a lot of exposure bracketing for each image and exposed the film as if it was around ISO 5 due to the time past prime. After I processed the film, it was completely black, so I figured it was either at some point opened, but there was absolutely nothing on the frames. I looked under a very bright light to see if I could see anything that resembled an image, but absolutely nothing. Not even on the film's perforations.
I have another roll of 35mm film, a roll of Tri-X, which came with another lot of cameras purchased, and on the cassette, it said fresh roll, and knowing that this roll may be bad, I thought I'd load it into the cassettes and give it a whirl. I pulled out the dark bag and loaded this roll of film into the cassettes. This was very easy, and I went through the neighborhood, taking more images. I got home and processed this film roll. I know that Tri-X has been an older film. I did some push processing, and the film turned out OK, but it wasn't a fresh roll of film, and there were other exposures on it.
I didn't want to postpone this post any further, so some of the images have double exposure. I picked the images that either had one or very little, so upfront, my humble apologies for the images from this camera, but overall, these aren't that bad.
Conclusion:
This camera did a fantastic job for a camera approaching 100 years old, and you need to remember it's a half-frame camera.
Besides the bad film on the first roll taken and the double exposures on the second, the camera was fun to shoot. The film cassettes were easy to load with some current film. Now, I'll need to get a fresh roll and try it for the third time. Just knowing the shutter is working and the camera takes images is 90% of the battle. Now I can take my time and update the post with cleaner images once I get some film for the holidays, shoot images, and repost them here.
Thank you for taking a few minutes from your day to look over this post. I can't tell you how much it means to me. Please feel free to email me if you have questions or concerns.
Until next week, please be safe.