Bolsey Model C-Twin Lens Reflex

My Bolsey C camera

Very early in my camera collecting career, the Bolsey cameras have been a steady companion in my collection. I believe this goes back to when, in my 20s, I'd go to local Flea markets, which were usually held in older Drive-in theatres due to their expensive areas, and find Bolsey cameras. Usually, they were the B2 models and generally in fair to poor condition.

 Every once in a while, I'd find one in working condition, which was a rarity. The thing that drew me to these cameras was the odd shape they have. They are generally smaller than the standard 35mm camera. Still, they have an odd shape where the front of the camera is much broader than the rear. The corners of the cameras are rounded off, giving them a sleek and modern look for their time. I compare them to the shape of automobiles of the time, which generally had rounded curves and were comfortable to use.

 The Bolsey C was a camera that I've always had my eye on to add to my collection for many years. I can remember looking through the Bible of all camera collectors, McKeown's camera guide, and seeing the Model C and the other Model B and Jubilee models, with thoughts that someday I'll have one in my collection. That day was about 4 years ago when I purchased another "lot" of cameras with the Model C within that lot. To my surprise, the camera was almost mint and had a working shutter. Even the fitted case was in excellent condition. The camera appeared almost unused for 70-75 years since the camera was initially introduced in 1950.

History:

Bolsey Camera Company can be traced back to Yakov Bogopolsky, a trailblazing figure in the early 20th-century photographic industry, who played a pivotal role in the evolution of compact cameras. Born in 1895 in Ukraine, Bogopolsky left for Switzerland in 1913-14, where he studied medicine in Geneva. Due to the Russian Revolution and WWI outbreak, he could not return to Russia. While studying medicine, he worked as a portrait photographer to earn money. During his time in Switzerland, he changed his name to Jacques Bolskey. While in Switzerland, his passion for photography grew. He even invented a camera that photographed the beating heart of a dog, which was used in surgery.

 One of Bolskey's earliest successes was the Bolex line of cameras he designed while working for Paillard, a Swiss company. These cameras, primarily for motion pictures, became highly regarded for their precision and durability. While in Switzerland, he also worked as a designer at Swiss watchmaker Pignons S.A., which produced the first Alpa camera.

 After 22 years in Switzerland and being denied citizenship there, he eventually immigrated to the United States in 1939, changing his name to Jacques Bolsey. Bogopolsky's most significant contributions were realized through the Bolsey Camera Company, which he founded in the 1940s in New York. 

Bolsey's hallmark was producing user-friendly, affordable cameras that maintained quality. His most iconic designs were the Bolsey B series of cameras, which debuted in the mid-1940s. These cameras, such as the Bolsey B, B2, and Jubilee, were compact and housed in durable cast aluminum bodies. They featured a coupled rangefinder and a fixed-focus lens, making them accessible to amateur photographers. The Bolsey cameras were marketed as an ideal solution for everyday photography, emphasizing ease of use and portability.

 One of Bolsey's key innovations was incorporating a built-in flash synchronization system, a feature uncommon in consumer-grade cameras at the time. This innovation further solidified the company's reputation for blending functionality with convenience. The cameras became popular in the United States, particularly among families looking to capture moments during the post-war era.

 Despite its early success, the Bolsey Camera Company struggled to compete with emerging Japanese camera manufacturers in the 1950s and 1960s. Companies like Nikon and Canon began producing more advanced and competitively priced cameras, dominating the global market. Bolsey's commitment to simplicity and compact design became less appealing as photographers demanded more advanced features.

 By the mid-1960s, the Bolsey Camera Company ceased operations. While short-lived, Bolsey left a lasting impact on camera design, particularly democratizing photography. The company's cameras remain collectors' items today, valued for their unique blend of aesthetics, engineering, and historical significance. Jacques Bolsey's vision and ingenuity continue to be celebrated in the world of vintage photography.

My Camera:

My Bolsey Model C is two cameras in one. It's a twin-lens 35mm camera that incorporates both a waist-level finder and rangefinder into the same camera body. The camera is 3.75" tall with the chimney down and 4.75" tall in the up position, 4.25" wide by 2.5" deep, and weighs 1 lb 2.6oz. The camera is made from aluminum and has a gleaming finish. The camera has a Wollensak Anastigmat 44mm f3.2 lens in a Wollensak shutter. My Bolsey C also still has the red round Bolsey emblem intact on the viewing chimney. So many Bolsey cameras are missing this, as they are easily lost.

 The camera has a waist-level finder with ground glass at the top for focusing and is parallax corrected to 2', which is also the minimum focusing distance. According to the Instruction manual, the waist-level finder is "exactly as you will shoot it. "The waist-level lens is also the same as the taking lens.

 The camera also has a coupled rangefinder with split image capability built into it. It has the best of both worlds for focusing. Both the waist level and the rangefinder on my camera are bright and accurate. The separate viewfinder is offset on the right side of the camera for framing purposes. Also, on the back of the camera, there are two sockets on the left side made for the flash unit that snaps into them. A flash with a normal PC cord won't work on this camera.

To load the camera, the back is removed from the camera body by switching a lever on the bottom of the camera to the "open" position. The back slides off, exposing the standard 35mm camera film chamber. You slide in a 35mm film cartridge into the open area on the left, bringing the leader over the roller and the drive gear with the sprockets, and slide the leader into the take-up spool. IMPORTANT: wind the camera; you need to pull the winding lever up slightly before the camera will allow the camera to advance to the next frame. If you don't do this step, you'll tear the sprocket holes from the film because the drive gear is locked until you pull the winding lever up before winding. Put the back onto the camera and lock it. At this point, lift the winding lever and advance two times to get it to the first frame. On the back of the camera is a depth-of-field scale.

One other function of the winding lever is cocking the shutter. The Bolsey Model C uses a bar to prevent users from taking double exposures. The shutter release is a lever on the right side of the camera. Behind the shutter release is a bar with a red dot on the end. After you take a photo, the bar with the red dot springs forward, preventing the shutter release from returning to the normal "taking" position. After you take the photo, lift the winding knob, and advance to the next frame, the bar with the red dot is pulled back into the camera, allowing the shutter release to move back to the "taking" position and cocking the shutter. If you try to take a photo with the red dot showing, the shutter doesn't trip, and no exposure is made. Not all Bolsey cameras have the red dot bar to prevent double exposure. I have several other Bolsey cameras (B2 Special in red and a grey B3) that don't incorporate this feature.

The camera only has 5 shutter speeds, 1/200, 1/100, 1/50, 1/25, and 1/10, along with "B" and "T" for timed exposures. The 1/25 and 1/20 are in red, warning of slow speed to use a tripod or some way to keep the camera steady. The control of the shutter speed is a slider bar above the speed indicating which speed will be used. The aperture settings go from f3.2 to f22. These are controlled by a separate sliding bar under the lens with a pointer pointing at the set aperture.

Close up of shutter spped and aperture controls on Bolsey C camera

My results:

Where I live, it's usually overcast and raining, but I had a few hours where the sun almost poked its head out, so I loaded a roll of film into the camera and drove to two different places close to my home to take photos. The first was a local park with a playground, and the second was a home with a massive Christmas display. The display mainly consists of plastic figures on the front of the house. I figured I get a few good photos here. Here are the results of the photo journey.

Conclusion:

I need to admit, I wasn't sure how this camera would perform or if I would like to use this somewhat oddball camera. I have to admit, the camera worked great, and it was really fun to shoot with. I really enjoyed the waist-level finder and thought it was bright and accurate in its ability to focus sharply. I also tried the rangefinder, which performed just as well. On a scale of 1-10, I'd give this an 8, maybe even an 8.5, in its usability, a joy to use, and results.

 You can get good results using either the rangefinder or waist-level finder. It's the best of two worlds built into one camera. If you don't have one, you should add this to your collection. Try to find a good working example to take out and use. I don't think you'll be disappointed.

 Thank you for taking a few minutes to read about this fantastic camera.

 Until next week, please be safe.

Ansco Memo Camera

My Ansco Memo camera

The Ansco Memo camera is this week's camera that I'm spotlighting, and it's a camera I've been itching to use for a while now. It's also the second time I've owned this particular camera. The first time was almost 35 years ago when I came across it at a camera show and was struck by its vertical design with the small round viewfinder on top. At first, I thought it may have been a small, odd box camera, but upon further inspection, it was a fairly early 35mm camera.

 My camera collection is constantly evolving, and I had sold the Memo camera I owned. However, my fascination with the Ansco Memo camera persisted, leading me to seek out another one a few years back. This time, I was on the lookout for the Boy Scout version of the Memo camera, a rare find that commands a price twice that of the standard version. 

 I found the current Memo camera online at an excellent price. The purchase was during the lost COVID years. The camera came with a significantly worn leather case, but it didn't have the needed film cassettes to use the camera. The Ansco camera was introduced between 1926-27, and the regular 35mm cassettes we're accustomed to now weren't standardized until 1934. Any camera manufacturer that made 35mm cameras during this time period had their own 35mm cassettes to use in their cameras. There is another Memo camera that's made by Agfa, which has similar cassettes and is somewhat interchangeable with the Ansco version. Still, I'll talk more about that later in the post.

 My Memo camera appeared to be in good working condition, with a functional shutter, so I was eager to use it for this post. I reached out to my friends in the camera-collecting community, and one of them, who had acquired a substantial collection in the past, came to my rescue. He not only had the empty cassettes I needed but also a roll of Agfa pre-loaded film in a cassette that would fit my Ansco camera. His generosity was overwhelming, and I was now fully equipped to use my camera.

My Ansco Memo camera with very worn case.

The Company:

The Ansco Camera Company has a fascinating history and is a key player in the evolution of photography. Its roots can be traced back to 1842 when Edward Anthony, a prominent photographic supplier in New York, established E. Anthony & Co. Initially, the company focused on importing and selling daguerreotype supplies, but as the industry progressed, it began producing its own photographic equipment.

 In 1854, Edward's brother, Henry T. Anthony, joined the business, leading to its rebranding as E. & H.T. Anthony & Co. The company thrived during the American Civil War by supplying cameras, chemicals, and photographic plates, which were critical for documenting the conflict. By the late 19th century, Anthony & Co. was one of the largest photographic supply houses in the United States.

 The pivotal moment in the company's history came in 1902 when it merged with the Scovill & Adams Company, a long-time competitor. This merger resulted in the formation of the Anthony & Scovill Company, which adopted the name "Ansco" for branding purposes. Ansco emerged as a significant player in the early 20th century, producing cameras, film, and related accessories.

Ansco Memo Ad.

 Ansco's fortunes were closely tied to innovation and competition. It introduced popular products like the Ansco Memo in 1927, one of the earliest subminiature cameras, and the Anscoflex in the 1950s, a unique twin-lens reflex camera designed by the famous industrial designer Raymond Loewy. Its cameras were known for reliability and affordability, appealing to amateur photographers.

During World War II, Ansco faced a significant challenge due to its ties to the German company Agfa. Ansco was owned by the German chemical conglomerate IG Farben, leading to its seizure by the U.S. government under the Trading with the Enemy Act. Post-war, the company was Americanized, and its assets were sold to General Aniline & Film (GAF) Corporation in 1943.

Under GAF, Ansco continued to produce innovative products, including cameras and color film. However, by the 1960s, it struggled to compete with industry giants like Eastman Kodak and Polaroid. GAF eventually shifted its focus to industrial applications of photographic film, and Ansco's consumer products gradually disappeared from the market.

 Despite its decline, Ansco's legacy endures in the history of photography as a company that made significant contributions to camera technology and film production. Its influence is still appreciated by collectors and photography enthusiasts who treasure its vintage cameras and historical impact on the field.

My Camera:

My Ansco Camera is 5" tall, including the round viewfinder, by 2 3/8" wide, including the shutter release, by 2 5/8" deep, and weighs 13.8 oz with two empty film cassettes in the camera. The original Ansco Memo camera wasn't leather-covered like mine is or has the shutter release guard. It was a stained wood camera with just a knob ion a lever sticking out of the camera to release the shutter. It wasn't until later in the camera's production that Ansco covered the camera in black leather and then added the shutter release guard to help prevent unnecessary shutter tripping. A wire handle on top of the camera makes it easy to carry the camera when you're not shooting.

 The camera has a Wollensak Velostigmat F6.3 lens with an unknown focal length and fixed focus. The camera only has three different shutter speeds, 1/25, 1/50, and 1/100, along with "B." The lens does offer aperture control that goes from f6.3-f16. Both the shutter speed setting on top of the lens and the aperture settings on the bottom of the lens are set by a small slider arm. The shutter release is on the right side of the camera and is protected by a small curved piece of metal intended to help with unexpected double exposures when you're not using the camera. It was more of a nuance than a help. The viewfinder on the top of the camera is easy to look through but doesn't give you an actual rectangular image. It has a more square look, so you must keep that in mind when framing your images.

During this era, 35mm film was mainly used in motion picture cameras. The Ansco Memo uses 35mm, which travels vertically in the camera instead of horizontally, which is more commonplace nowadays. To transport the film across the shutter, the camera utilizes a "claw" method of grabbing the film sprockets on the edge of the 35mm frame and pulling it down across the shutter. The back of the camera, which is removable to lead the film, has a claw mechanism. The film doesn't need to be moved very far as the Ansco Memo isn't a full frame 35mm camera (24mmx36mm). It has a half-frame size of 18mm x 24mm and is in the horizontal format when holding the camera. The film only needs to move about 19-20mm to get to the following exposure.

I was gifted two different cassettes for this camera. I received an original Ansco cassette with a curved side and a fully loaded Agfa cassette, which is the squared-off version. Due to how the camera is made, you can put the Agfa version on top of the Ansco camera. The top is for unexposed film, and the take-up of the cassette with the curved side needs to go on the bottom of the camera. If you look at the camera's take-up area, there are some wooden braces that don't allow the squared-off cassettes into it, but the curved cassettes fit as they should. At this point, I put the unexposed Agfa cassette into the top of the camera and put the film leader into the take-up cassette, and we're ready to go. 

 To open the film cassettes, one of the sides comes off the cassette. The easiest way to open it is to slightly pince the corner of the cassette; this will release some pressure, and the cap will come right off. Inside the cassette is a coiled wire, which is used to guide the film into the cassette and not have it bunch up. When loading film into the cassette or unloading it into my processing reel, the film would move very smoothly, and there was no problem getting the film in or out, which was a worry when I first started.

To open the camera to load the film, on top of the camera is a slider that you push over, and the back of the camera comes off. Due to the smaller frame size, the Ansco camera takes 50 images on a pre-loaded roll of film. The frame counter on the camera advances up to 50. To advance the film to the next frame, you slide the advance bar on the back of the camera down once, advancing the film to the next frame. Similar to the current 35mm camera, the camera is in the horizontal format, and to take a vertical image, you need to turn the camera. This is awkward, but it wasn't bad when I ran some film through the camera.

My Results:

I put the roll of Agfa Rapid film into the camera and shot about 50 images of walking my dog around the neighborhood. I didn't have a good sense of processing time since the film was close to 90 years out of date. I did a lot of exposure bracketing for each image and exposed the film as if it was around ISO 5 due to the time past prime. After I processed the film, it was completely black, so I figured it was either at some point opened, but there was absolutely nothing on the frames. I looked under a very bright light to see if I could see anything that resembled an image, but absolutely nothing. Not even on the film's perforations.

 I have another roll of 35mm film, a roll of Tri-X, which came with another lot of cameras purchased, and on the cassette, it said fresh roll, and knowing that this roll may be bad, I thought I'd load it into the cassettes and give it a whirl. I pulled out the dark bag and loaded this roll of film into the cassettes. This was very easy, and I went through the neighborhood, taking more images. I got home and processed this film roll. I know that Tri-X has been an older film. I did some push processing, and the film turned out OK, but it wasn't a fresh roll of film, and there were other exposures on it.

I didn't want to postpone this post any further, so some of the images have double exposure. I picked the images that either had one or very little, so upfront, my humble apologies for the images from this camera, but overall, these aren't that bad.

Conclusion:

This camera did a fantastic job for a camera approaching 100 years old, and you need to remember it's a half-frame camera.

 Besides the bad film on the first roll taken and the double exposures on the second, the camera was fun to shoot. The film cassettes were easy to load with some current film. Now, I'll need to get a fresh roll and try it for the third time. Just knowing the shutter is working and the camera takes images is 90% of the battle. Now I can take my time and update the post with cleaner images once I get some film for the holidays, shoot images, and repost them here.

 Thank you for taking a few minutes from your day to look over this post. I can't tell you how much it means to me. Please feel free to email me if you have questions or concerns.

 Until next week, please be safe.

Corfield Periflex Camera

The Corfield Periflex is a relatively new camera to my collection. I've only had it for a few months, but I've desired to own one for many years. The opportunity arose to purchase one of the earlier models that was in good working condition and at a reasonable price for this camera in its condition, so I grabbed the opportunity and purchased it.

My Corfield Periflex Camera

 When the camera arrived, it was in good working condition and in the cosmetic condition described, so I was pleased with the purchase. I knew from purchasing the camera that my aim was to do a blog post on it, as the camera has many unique features that have not been seen in cameras before or since. 

 The Periflex is a 35mm camera with an appearance that resembles a Leica only because of the size and initial shape of the camera. Unlike the Leica cameras, the Periflex doesn't offer the photographer rangefinder focus, sprockets film advance, removable baseplate, or take-up spool, but it does offer the same lens thread mount and excellent optics in a small and compact camera made in the United Kingdom.

The Company:

Sir Kenneth Corfield

Sir Kenneth Corfield (1924–2016) was a British engineer, entrepreneur, and photographer whose work significantly influenced the photographic industry in the UK, mainly through his company, Corfield Ltd. Known for his pioneering approach to camera design, Sir Kenneth's legacy is deeply intertwined with the Corfield Camera Company, which he founded in the mid-20th century. His innovative ideas, especially those focused on making quality, compact cameras, helped the brand gain a reputation in the photography community, although its operations ended in the 1970s.

 Kenneth Corfield was born in the UK in 1924 and trained as an engineer. He developed a passion for cameras and photography from an early age, and this interest led him to create camera equipment designed to fill the gaps he observed in the photographic tools available at the time. His mechanical expertise and curiosity about precision instruments motivated him to create Corfield Ltd., a company that produces cameras for professional and amateur photographers alike.

 Corfield founded his company in the post-war period when there was increasing demand for affordable, portable, high-quality photographic equipment. Starting in the 1940s, Corfield Ltd. initially operated as a small workshop but soon expanded to meet the needs of a growing photography market in the UK. Unlike the more prominent, established companies primarily located in Germany and Japan, Corfield's British roots gave his products a unique appeal in the domestic market. They also partnered with British Optical Lens Co. in Walsall, which designed and made the Lumar optics for Corfield.

Ad for the Corfield Camera

The company's first significant product was the Periflex, introduced in 1953. This camera became known for its innovative use of a periscope-type viewing system. This device made the Periflex one of the more unique 35mm cameras available at the time, as it allowed users to see the image through the lens without needing an expensive reflex mirror. The camera was compact, affordable, and relatively simple compared to other rangefinders, and it catered to a market that wanted quality at an accessible price.

The Periflex series became the backbone of Corfield Ltd.'s reputation. The first model, the Periflex I, was followed by several iterations, including the Periflex II, III, and Gold Star. Each version introduced new features and enhancements to meet photographers' increasing demands, such as improved shutter speeds, lens mounts, and more durable designs. 

The defining characteristic of the Periflex cameras was the periscope-like focusing mechanism. This mechanism, placed directly above the lens, allowed photographers to focus accurately without the bulk or complexity of a traditional single-lens reflex (SLR) system. This feature made the Periflex a unique hybrid of a rangefinder and SLR qualities, appealing to those who valued compact design but still wanted accurate focus control. Although some photographers found the system unorthodox, others appreciated the camera's compactness and precision, making it popular among professionals and amateurs.

Despite its successes, Corfield Ltd. faced stiff competition from German and Japanese camera manufacturers, producing high-quality cameras on a much larger scale. Companies like Leica, Nikon, and Canon dominated the market with advanced SLRs, and Corfield's unique designs needed to catch up with the rapid technological advancements. While the Periflex series had gained a loyal following, it required more sophistication and reliability than its competitors, ultimately limiting its market appeal.

In the 1970s, Corfield Ltd. ceased producing its cameras, and the Periflex series also ended production. Although the brand did not survive, the innovations introduced by Kenneth Corfield influenced camera design and highlighted the potential for high-quality British-made photographic equipment.

Kenneth Corfield's contributions to the photographic world extended beyond his camera company. Even after Corfield Ltd. ceased operations, he remained active in the photography industry. Later in his career, Corfield was involved with Gandolfi, a British large-format camera manufacturer, and his influence continued to be felt through his consulting and design work in the field.

Corfield's legacy is remembered by photography enthusiasts and collectors who admire his innovative approach to camera design. The Periflex cameras, in particular, are valued among collectors for their uniqueness and historical significance. Sir Kenneth's work reflects a time of British ingenuity in the photographic industry. It is a testament to a small, independent company's impact on a competitive global market.

Bev Parker has a wonderful website dedicated to The Corfield Company.

My Camera:

My Corfield Periflex camera isn't the first model, as the first 200 Periflex camera had a black top and bottom plate like mine. Still, they were covered in brownish pigskin on the body. I believe mine is the third version, as the engraving has been moved to the periscope but still has the black top and bottom plate, black leatherette covering, and chrome lens.

 My Periflex camera is 5.5" wide by 3.25" tall, including the periscope, and 3.25" deep from the back of the camera to the front of the lens focused to infinity. With the standard Lumar 50mm f3.5 lens, it weighs 1 lb 1.4 oz. The camera is made from aluminum, as opposed to brass, which was a more common construction material at the time. Aluminum was easy to work with for both the body and lenses and was less expensive.

This hybrid camera doesn't have a rangefinder to focus. Still, it has a very small mirror that drops down into the camera and points out through the lens, allowing the photographer to focus on the subject, which is very similar to a single-lens reflex camera. The periscope is achieved by the center tube over the lens, which has a small knob on the back that you pull down and look through the optics on the top to view your subject.

Periscope mirror when depredded in the film chamber

I was very skeptical at first, but it does work and focuses very crisply on the subject as it should. There are some things that could be improved in this system. First, you need to open the aperture to get the brightest image to focus on, so you don't do this quickly. Once the camera is focused, you stop the lens down to the desired aperture setting to get the proper exposure, move your eye to the mounted viewfinder on the top to frame your subject, and then take the photo. Once you do it a few times, it becomes manageable. But it would be best if you remembered to reset your aperture, which I didn't do on a few frames. That's just a matter of getting to know the camera and using it more often. I DID like looking through the lens in a small compact camera to focus on the subject.

 My Periflex has shutter speeds from 1/1000 to 1/30 sec exposure times along with "B" for timed exposures. Above the shutter speed indicator is a knob that needs to be turned to cock the shutter before making an exposure. Advancing the film DOES NOT cock the shutter. These are two separate operations and are not intertwined. You do, however, need to advance the film winding lever AND cock the shutter before the camera will fire. This makes it impossible to take a double exposure on this camera. At least, I am still looking for a way to do it. The shutter release button is on the front of the camera, similar to the Topcon cameras, so it's more of a squeezing motion than a pressing down motion. There is a removable collar around the shutter release to attach a Leica-style cable release for time exposures.

Top view of Corfield Periflex. from L-R, Rewind knob, Removable viewfinder, Periscope mirror, Shutter speed dial with Shutter cocking knob, Rewind button, Film advance knob

Another oddity about my camera is that I didn’t discover it until after I had shot all the photos for this post. I didn’t think there were aperture settings on the lens, but after I reread the instruction manual, there is a small black mark on the lens that goes along the depth of field scale which indicates what aperture you’re using. Looking at the Corfield Periflex instruction manual, they discuss apertures and depth of field, but there is where the aperture settings are. All my exposures were guesses of the size of the aperture needed. The focus on my lens is smooth, the aperture ring moves well, too, and the Lumar lens system has a Leica Thread mount, so the advantage is you can use any LTM lens with this camera.


Loading the film is very simple, and there is another camera oddity in the loading process on the camera. To open the back to load the film, you turn the chrome circle on the camera next to the tripod socket until the arrow points to the white dot. Once that is done, the camera's back will slide downward, exposing the film chamber. I first noticed that there was no drive gear to advance the film, and the take-up spool (drum) on the camera was much larger than the usual 35mm cameras on the market. The take-up spool is actually a drum that advances 180 degrees per wind of the film advance, so as the film is pulled and wrapped around the drum, the spacing of the film frames becomes more significant as you go from the first to the last frame.

Once the film is loaded, you slide the back into position on the camera and turn the chrome wheel on the bottom away from the white dot to lock the back onto the camera. When finished taking the roll of photos, rewind the film back into the film cassette. The drum/take-up spool release is a small chrome button between the shutter and film advance knobs. Press that button down, and you can rewind the film back into the cassette for processing.

My results:

I took the camera for a walk in the neighborhood on a sunny afternoon to see what I could do with the camera. It took some time to think about the metering process on the subject. Opening the aperture, setting the shutter speed, pressing down the periscope to focus (which was fun and easy), resetting the aperture to a size opening I thought might be the correct aperture size, putting the viewfinder to my eye to compose the photo, then taking the photo. Certainly not like cameras today with autofocus, automatic light meter settings, etc. You slow down, take your time and compose the shot, which I enjoy doing.

Here are a few of the images from the camera.

Conclusion:

I enjoyed shooting with the Corfield Periflex. It slows you down and makes you think about the process of creating an image rather than taking one. Not that the photos shown are any works of art, but I like the slower and more methodical process of taking the photo.

 The camera is small and compact, has the shutter speeds needed, and has good optical sharpness. After finding where the aperture settings are, it makes more sense on how to do the aperture settings. I only wish I knew that before using the camera for the first time.

 Thank you for taking a few minutes from your day to read my review of the Corfield Periflex, a gem of a camera. 

 Until next week, please be safe.

Ilford Advocate Camera

It's been a year since I first laid eyes on the Ilford Advocate camera, and I've been eager to share my experience with it. The journey began in England, where my wife and I stumbled upon a charming camera and photo reseller, Juliano of Cameras London, on Portabello Road. Little did I know that this encounter would lead to the acquisition of a unique piece of photographic history.

My Ilford Advocate camera and case.

 My wife and I went to Portabello Rd in London on Friday to look at the antiques there and for me to look for photo items, which there were few of, but I was told that Juliano would be there the next day and he was the person to see. While there wasn't much time to return the next day, I took the bus early and arrived while Juliano set up. My intention wasn't to purchase an Advocate, but as we talked and I mentioned I had one before, he said he had a couple and was willing to part with one. He didn't have it with him, so we arranged to have it shipped to my home in the US.

When the camera arrived and a couple of other items I was buying from him, it was in excellent working condition. I was delighted, as the camera isn't typical but more of an oddity. While I collect "colored" cameras, the white color of this camera makes it stand out in the crowd of mainly back cameras. I was happy to have the Ilford Advocate back in the collection, in excellent working condition, and the full-fitted leather case, too.

The Company:

Front view of Ilford Advocate camera

Ilford is known less for its cameras than for its film, photo paper, and now inkjet printing paper, at least within the photo community. The company has had a long history with many name changes. Still, it's always been a significant name in the photo industry before companies like Leica, Rollei, or even Kodak.

 The original company name was Britannia Works, which was started by Alfred Harman in 1879 by making Gelatine Dry Plates in his basement on Cranbrook Rd, in Ilford, Essex. Harman initially started printing services in 1863, and in 1878, he patented "producing enlarged photographs with artistic finish." By 1880, Harman moved to Roden St. and started trading as Brittania Works Company. By 1883, the company was expanding with the popularity of photography, and Harman opened a new factory to produce plates.

Ilford Ad from 1890s

By 1890, Harman produced a popular book, "The Manual of Photography," and the book, "The Ilford Manual of Photography," was created under that name until 1958, when it was in its 5th edition. In 1891, Kodak started producing plates in Harlow, Middlesex, as a competitor to Britannia Works. In 1897 and again in 1903, Eastman Kodak attempted to purchase Britannia Works Company, but both times were unsuccessful. In 1898, Alfred Harman retired at age 50 but did consulting work for many years. In 1900, the company changed its name to Ilford, Ltd. The town council was happy and objected, but with persistence, the name was changed.

 In the 1960s, the company was owned by Ciba, and they merged with the French company Lumiere and Swiss company Tellko and became the Ilford Group. In 1989, the Ilford Group was purchased by the US-based International Paper Company, and together, they merged to become Ilford Anitec. From 1990 to now, the company has gone through a few other acquisitions and receiverships, and the current time is when the parent company is Harman Technology. Through it all, they still produce tremendous film, photo paper, film, and paper chemistry.

 To my knowledge, only one camera manufacturer was under the Ilford umbrella in this long-winded explanation of the Ilford company. That is Kennedy Instruments Ltd., which designed and built the Advocate starting in 1947 and updated it in 1952. The rarely-seen Monobar cameras were produced from 1958 to 1967. All the other cameras with the Ilford name were created by companies like Dacora, AGI, or Kershaw-Soho.

My Camera:

The first thing I noticed about the camera, other than the apparent white color, is the weight of the camera. Or the camera's lack of weight as it's a very light camera. The camera is made from a die-cast aluminum body with an enameled white finish. The camera body is smooth to the touch and lacks any leather or leatherette, which is uncommon for cameras. My camera measures 5 3/8" wide by 3" tall by 2.5" deep and weighs 1lb 1.5oz without the fitted leather case.

 The camera is straightforward and doesn't have a lot of extra knobs or buttons to do different things on a camera which is what makes this one so unique. To open the back to load the film, you only need to pull open the aluminum bar on the right side of the camera, which releases the lock holding the back closed. Once you open the, I noted chrome gear by the advancing cogs and onto the film advance spool. My first thought was, That's unusual. Then when I tried to put in the film, the rewind knob didn't pull up like the majority of 35mm cameras to load the film. As I poked around, I noticed that the rewind knob is actually hinged, and it pulls away from the body, which allows the photographer to put the film into the camera body.

It's always my inclination to put the film cassette into the camera first, then bring the leader to the take-up spool to load. But looking at the instruction manual, they suggest putting the film leader into the take-up spool first, then putting the cassette after. Having the rewind knob on a hinge makes perfect sense to do it that way. Once I put in the film, I always take the slack of the film with the rewind knob, so when I go to advance the film, I know the film is transporting when I see the rewind knob turn ad I advance to the next frame.

 The only other settings needed to take photos are all around the Dallmeyer Anastigmat 35mm f3.5 lens on my camera. There are three different rings around the lens. On the outer or the largest ring, which has "Advocate" printed on the top, is the shutter speed dial, with speeds of 1/200, 1/150, 1/100, 1/50, 1/25, and "B," which are set according to a red dot on the out portion of the ring. The next ring from the shutter speeds is the focus distance, which has the closest focus distance of 3 feet to Infinity. The inner ring has aperture settings, which go from f3.5 to f22. My first inclination was that the inner ring, which is actually on the lens itself, would have the focus ability, but it's the aperture settings. I had to get used to that when shooting.

To take the photos, the shutter release is a pulling action as you pull the shutter release back towards the camera body as opposed to the most common pressing the shutter release down. It's more similar to an Exakta or Topcon Super D. You get used to it when shooting. The feel of the shutter is firm, and you can hear the rotary shutter releasing and firing, so there is no missing if the camera took the photo. There is an auxiliary remote shutter socket on the front of the camera if you choose to put the camera on a tripod and shoot with a more prolonged exposure.

 The viewfinder on the camera is bright and easy to compose images. My camera is the second version made, as the original Advocate cameras didn't have the flash sync capability, which is located at about five O'clock on the lens and is a double-prong sync cable. The original model also has a chrome pressure plate to hold the film flat.

Viewfinder and shutter release on Ilford Advocate camera

 Here's the fun and one of the more exciting things I like about this camera. Once you've shot all the photos and want to rewind the film, there is no button to disengage the winding sprocket. All you need to do is press down the winding knob down, which presses the gearing system down, and the winding gear is free moving, and the film can easily rewind into the canister. I really enjoyed the simplicity of this system.

My Results:

I took the camera to a local farmers market and used a real "shoot from the hip" method. I tried to be somewhat discrete, which may be difficult with a bright white camera around your neck, but here are some of the results.

Conclusion:

I really enjoyed shooting with this camera. The biggest obstacle I had was remembering which ring did which function. I kept going back to the inner ring, which was closest to the lens and was the focus, but it was an aperture, so I needed to keep this in mind during shooting. If I were to use it more often, it wouldn't be that big of an issue; I also liked that the case was in excellent condition, which is only sometimes the case for older cameras.

 Thank you for taking time from your schedule to look over this post.

 Until next week, please be safe.

Robot Royal 36 Camera

Being a big fan of The Robot cameras and having done an earlier blog post on the Robot Luftwaffen Eigentum camera, I wanted to get a camera I could use when we went on vacation or just out for the weekend. Years ago, I came across an excellent and working condition Robot Royal 36 camera. It was from an online auction, so I made a relatively low offer and won it.

 When I received it, I was surprised by the weight and heft of this particular camera. I put it through routine tests to see if the shutter was indeed opening and closing, which it was. The lens was clean, another positive, and the transport was active and in good working condition.

 When COVID hit, I was laid off from one of my favorite jobs. I started writing my camera blog. After being off work for ten months, I got hired for a better position and loved the job, company, and boss, but I put the camera on my shelf for the next four years until I recently retired and started writing my camera blog again.

History:

Otto Berning & Co. started in Dusseldorf, Germany, in 1933. Otto Berning and Co. began to manufacture amateur cameras in 1934 when a young watchmaker in his 30s, Heinz Kilfitt, designed the first compact camera for what Robot would be so well known for. The design had a spring-loaded motor winder, a unique item brought to the camera industry due to his watchmaking skills. Heinz Kilfitt also designed the camera to have a 24x24mm film format. He offered the format size to both Kodak and Agfa, who rejected it, so he sold the design to a young Hans Berning, who was only 23 and worked for his father's company. 

 Robot cameras provide a film format of 24x24mm on most of their cameras. An advantage of the 24x24mm frame size was that the photographer could get 50 images on a roll of film instead of the standard 36 in the traditional 24x36mm format. Another advantage was that there was no need to turn the camera for vertical shots.

Some unique features of the Robot cameras are that they use a rotary shutter and sprocket film drive system, which are more common in the cine cameras of the time. Robot cameras also have a 90-degree switchable viewfinder, allowing the photographer to point the camera in a different direction while looking through the viewfinder and taking photos. All the cameras have a winding motor of film advance system that allows the photographer to wind the motor and shoot rapidly up to 5-6 frames on a single wind, depending on the camera.

 Robot also provided either Carl Zeiss or Schneider-designed lenses on their cameras, which gave the photographer unparalleled sharpness in their images. The cameras were die-cast zinc and stamped stainless steel bodies chalked full of clockwork inside, and they are very sturdy and extremely well made, a testament to the high-quality materials used in their construction. 

During WWII, Robot produced cameras for the German Luftwaffe to put on their Stuka dive bombers. After the war, Robot continued producing high-end cameras like the Robot Star and Junior cameras. Robot produced the Robot Royal in three formats, with a few feature and film format variations. 

My Camera:

My model is the Robot Royal 36, model III, and it has the film format of 24x36, the most common film format for 35mm cameras. My camera has a Schneider Xenar 45 mm f2.8 lens. My camera has a Schneider Xenar 45mm f2.8 lens. It measures 5.5" wide x 3" tall x 2.75" deep from the front of the lens to the back of the camera and weighs a whopping 2 lbs. 0.4 oz. That's the first thing I noticed when I unwrapped the camera. This is a very solid and well-built camera with unique features that set it apart from other cameras. 

To open the camera, as you hold the camera there is a chrome tab with etching on it on the left side. With your thumb, you lift that and the latch and open the back of the camera. Unlike most 35mm cameras, this camera has a take-up spool you need to load the leader into as opposed to just putting the film leader into the take-up slot, and the camera takes up the film. You need to take the take-up spool apart and thread the film leader into the spool, then put the cassette back together and load the film and take-up cassette into the camera. Then fire two frames, and you're ready to go.

My camera has shutter speeds from 1/2 sec to 1/500 sec, along with B for timed exposures. The bottom of the camera has a winding mechanism that allows me to fire 12 photos at full wind, which takes me about ten and a half cranks to wind fully.

Yellow, Green and Blue dots on lens and Aperture number for Zone Focus.

 The rangefinder on my camera is very bright and easy to focus. The other significant item about the Robot camera and lens system is they allow the photographer to shoot with zone focusing, which is fantastic for street photography. The lenses have yellow, green, and blue dots, which correspond to the colored apertures on the lens. The lens's apertures 2.8 and 5.6 are in yellow, F8 is in green, and f16 is blue. All you need to do is match up the color dot on the focus dial and the aperture used, and the lens shows you your depth of field. This procedure is similar to all other lenses, but the color coding makes the system more "user-friendly."

Removing and reattaching the lens of the Robot Royal 36 is simple. A tabbed collar at the bottom of the lens, when moved to the left, allows the lens to be detached. To reattach the lens, align the two red dots and slide the collar counterclockwise. This careful procedure ensures the lens is securely in place.

Switch for “Green Dot” normal film advance, “Red Dot” Close viewfinder and “R” Rewind film back into canister.

Once I shot the film, One the back of the camera and to the right of the viewfinder is a switch with a green dot for regular forward film transport, there is a red dot which closed the viewfinder half way and "R" for film rewind. I put the camera in the "R" position and reminded the film as a regular 35mm camera procedure. On the bottom front of the camera are the flash sync ports for "X" (electric flash) or "M" (bulb flash) settings.

Results:

 I took a roll of film, put it through my camera, and walked around my backyard to see how the camera performed. This is the first time I got to shoot with the camera since I bought it 4-5 years ago, and there were a few anomalies in the camera. There seems to be a slight light leak, but to be 100% transparent, the film I used was old, and one I had shot just a few frames with and rewound the film with the leader exposed more than ten years ago, so I can't 100% blame it on this camera.

Conclusion:

While Leica has the prestige, Robot and Alpa are probably the best-built cameras in terms of craftsmanship and overall quality. The camera is excellent, the lenses are fantastic, and it offers things built into the system, like motor advancement and an excellent feel. I had a great time shooting with it, and I need to run a fresh roll of film through this beauty more often.

Thank you for taking time from your busy day to review this blog.

Until next time, please be safe.

Argus Model K Camera

I was looking through a group of cameras purchased a while ago, and when I opened the case to look inside, I remembered thinking that I’d never heard of an Argus Model K camera. 

My Argus Model K Camera

 I was familiar with the camera company Argus and have owned hundreds of their very familiar models, like the grand old dad of cameras, the Argus C3. I’ve had Argus C4, C33 and lenses, C44, Argoflex, many of the different A series, and even projectors.

 At this point, I figured it was an interesting camera to do a blog post on, as it had some real oddities, and I’d never done a post on Argus, so here it goes.

The Company:

The company Argus started as International Radio Corp., was started in Ann Arbor, Michigan, in 19931 by a group of local businessmen and produced radios during this time. Some of these prominent business people were William E. Brown Jr., who became the mayor of Ann Arbor; George Burke, a prominent judge at the Nuremberg Trial after WWII and who later became director of the Argus; and Charles Albert Vershoor, the company’s president.

 International Radio Corp. employed around 75 people, producing radios made from molded plastic rather than wood, which was popular at the time. Producing the radios from molded plastic was also less expensive, which made them popular during the Depression era. These radios were sold under the “Kadette” brand and are still collectible today.

Radios were a seasonal business that did well in the fall and winter seasons. To keep the company busy in the slower spring and summer periods, the company produced a low-priced 35mm camera, the Model A, made from molded plastic and sold for the ridiculously low price of $12.50 in May 1936.

 The camera became wildly popular due to its low cost and the rising popularity of Kodachrome film. Because of the camera’s popularity, the company decided to sell its radio patents and change its name to International Research Corp., where it concentrated on the photographic portion.

In 1940, Argus produced optics and radios for the war effort. In 1942, all domestic production was halted to concentrate their effort on military optics and radios for the US and allied forces. With Government loans, Argus expanded, and in 1944, the company changed its name to Argus, Inc. and won several awards for its war effort in producing products.

 After the war, Argus, Inc. revamped production for its consumer line, and by the 1950s, Argus Cameras was the second largest camera producer in the US, second to Eastman Kodak. Later, in 1957, Argus was purchased by Sylvania, the flash bulb company. In 1962, Sylvania sold Argus to Mansfield, a Chicago company, where they started to move out of Ann Arbor. There were several different transactions, and in 1969, all domestic camera production ended.

 An interesting note is that Argus’s most popular camera, the Argus C3, started production in 1939. It was a departure from their molded plastic A series with a metal body. The ever-popular camera, fondly known as “The Brick,” sold for $25.00, and by 1962, 2 million cameras had been produced. The Argus C3 was known for its robust build, simple controls, and excellent image quality, making it a favorite among photographers.

A tremendous website is dedicated to The Argus Reference Site. It includes links to the Argus Museum, a treasure trove of information and artifacts related to the company's history, and a book on the company, Argus - Fine American Cameras -- a book by Bob Kelly, Ron Norwood, Mike Reitsma, and Phil Sterritt. The book provides a comprehensive overview of Argus's journey from a radio manufacturer to a camera producer, along with many other great links.

My Camera:

First, my camera isn’t by any means in perfect condition. But all the shutter speeds sounded accurate, and the aperture opens and closes, so that’s a good first step. Now for the not-so-good things about my camera. The front viewfinder glass is missing, and the extinction meter window is completely black, which means I’ll need to use my handheld meter.

The transport was in good condition, so I opened the back of the camera and wanted to put a roll of 35mm film to see how this camera performed. Not having the instruction manual didn’t help, especially when loading the film. I kept looking at the film chamber and thinking, “There’s no way a 35mm cartridge will fit into that area”. So I started to pull, prod, and push different things until the film plug popped off the bottom of the camera, exposing where to put the film to load the camera. That’s an interesting thing to do to load the camera. For demonstration purposes, I had a roll of color for the photos, but below, I shot B&W.

The camera loads like any 35mm camera, but similar to cameras like the Kodak Pony 35, to advance the film to the next frame, you need to “unlock” the advance gear. This button is also the button you need to release the advanced gear so you can rewind the film into the film canister.

 Now that I have film loaded in the camera, and my viewfinder didn’t effectively work due to the missing front glass, I needed to guess on composition. Around the lens is the focus ring, which moves pretty smoothly on my camera. I walked around my front yard, focusing on my subjects and composing in my mind what the photo would look like. Using my trusty handheld meter, I set the shutter speed at 1/200 and my aperture to what the meter told me. The aperture settings are on the bottom of the camera and are right next to the shutter speeds, which are coupled to the extinction meter. There is a second shutter speed dial around the lens, too. My camera has an Argus Anistigimat f4.5 lens. There is no focal length on the lens.

The camera has an odd design as the viewfinder and aperture controls are on the bottom of the camera. I kept wanting to hold the camera upside down to take images, but without a working viewfinder, it didn’t matter. The camera shape is slightly different for a 35mm, and more resembles a smaller medium format camera or one that shoots 127 or 828 film, as opposed to 35mm. The camera measures 4.75” wide x 3” from the front of the lens to the back of the camera x 3.25” tall, measured from the top of the film plug to the bottom of the winding knobs. The camera weighs in at 1 lb. 3.2oz without film.

Now that I had shot the film and wound it back into the cassette, it was time to take it to my darkroom, process it, digitize the negs, and show you what I had done.

 The Results:

Here are some of the images I took with the Model K camera. Overall, the lens did a good job; the photos are relatively clear and sharp. The film I used was some older B&W T-Max 400, so it was a bit grainy, but I was surprised by the results.

Conclusion:

Besides the flaws I mentioned above, the camera was surprisingly fun to shoot and produced very nice images. My case is very stiff, as the leather is very dry, and the front is coming off. I didn’t realize this camera is rare, as they only produced about 2000 before they ended production. I would be inclined to sell it at some point, but I’m thrilled I put film in it and shot with it.

 Thank you for taking a few minutes from your day to look through this blog post. I have a few other gems to review, so I hope you’ll watch for the next post.

 Until then, please be safe and well.